KHarms
Oct 05, 2009, 01:29 PM
September 25, 2009
Release 9.0 Build 70
This build corrects these issues:
If you change the home mode, the tray icon didn't always change to show the correct state.
A new installation may have encountered a problem on the first device added. The "Type" step in the wizard could act oddly. A popup "Parameter error" may display. It has to do with a mistake in the parts file although the type tab should have been implemented better.
Support for the Insteon 1-input / 1-output IOLinc didn't work correctly. If you tried to test the input or output status in a program test element it is a mess. The UI was wrong and the implementation on getting the status and processing the reply was wrong.
If you swap the PowerLinc using the PowerLinc Swap Tool, all the links get reprogrammed correctly but the names for HCA initiated scenes get lost.
A problem with HCA support for older UPB keypads that tracked their LEDs by a "group" mechanism resulted in HCA not keepting its internal state up to date. This could show incorrect LEDs in the web interface.
A problem with some scenes could result in HCA not tracking the effected deveices state correctly has been resolved.
Many issues with the UPB Keypad Light Dimmer have been corrected.
The Expression Builder for The _DimPercent and _DimLevel functions didn't correctly show the the optional second parameter. The _HeatSetpoint and _CoolSetpoint functions were omitted completly.
The _DimLevel and _DimPercent functions weren't correctly processing the optional second argument
The Email Test button now sends to the "To" name if supplied and the "From" name if the "To" is not supplied
A small problem in the Standard parts file has been resolved
The Sample MyHome didn't correctly reference the text scripts
In Insteon Device Replace, HCA could have problems programming if the old and the new devices weren't the same V1/V2 version. Now corrected.
Insteon Device Replace didn't update any triggers that used the old address to use the new address.
Displays with picture backgrounds now have a right-click option that turns on and off the icon labels.
If you are a registered user of HCA 9, go here to get the download link and password.
http://www.hcatech.com/index.php?sid=products&pid=upgrade
BEFORE installing remember to shutdown HCA and to MAKE A BACKUP of your design file!
Release 9.0 Build 70
This build corrects these issues:
If you change the home mode, the tray icon didn't always change to show the correct state.
A new installation may have encountered a problem on the first device added. The "Type" step in the wizard could act oddly. A popup "Parameter error" may display. It has to do with a mistake in the parts file although the type tab should have been implemented better.
Support for the Insteon 1-input / 1-output IOLinc didn't work correctly. If you tried to test the input or output status in a program test element it is a mess. The UI was wrong and the implementation on getting the status and processing the reply was wrong.
If you swap the PowerLinc using the PowerLinc Swap Tool, all the links get reprogrammed correctly but the names for HCA initiated scenes get lost.
A problem with HCA support for older UPB keypads that tracked their LEDs by a "group" mechanism resulted in HCA not keepting its internal state up to date. This could show incorrect LEDs in the web interface.
A problem with some scenes could result in HCA not tracking the effected deveices state correctly has been resolved.
Many issues with the UPB Keypad Light Dimmer have been corrected.
The Expression Builder for The _DimPercent and _DimLevel functions didn't correctly show the the optional second parameter. The _HeatSetpoint and _CoolSetpoint functions were omitted completly.
The _DimLevel and _DimPercent functions weren't correctly processing the optional second argument
The Email Test button now sends to the "To" name if supplied and the "From" name if the "To" is not supplied
A small problem in the Standard parts file has been resolved
The Sample MyHome didn't correctly reference the text scripts
In Insteon Device Replace, HCA could have problems programming if the old and the new devices weren't the same V1/V2 version. Now corrected.
Insteon Device Replace didn't update any triggers that used the old address to use the new address.
Displays with picture backgrounds now have a right-click option that turns on and off the icon labels.
If you are a registered user of HCA 9, go here to get the download link and password.
http://www.hcatech.com/index.php?sid=products&pid=upgrade
BEFORE installing remember to shutdown HCA and to MAKE A BACKUP of your design file!