HCA works with all the powerline interfaces made by Marrick Ltd.  This includes the LynX-10 (all models), the LynX-10 PLC and the LynX-PORT.

Depending upon the interfaced used, HCA provided complete support for all the features of the hardware.  For example, when using the LynX-10PLC the LynX-Net protocol is used and configured from within HCA.  HCA supplies a user interface for adjusting the transmission power and reception sensitivity of the LynX-10PLC.

When using the LynX-PORT, HCA contains complete setup facilities to change the operation of the eight relays, inputs and analog channels.  HCA programs can also modify the operation of the relays, inputs, and analog channels "on the fly".   No other software available can do this.  HCA also supports the LynX-PORT remote protocol to make changes to the boards operation using powerline signals.

More information on the Marrick Ltd. line of processors can be found on their Marrick Ltd. web site

More information on how HCA works with the Marrick Ltd. family of products can be found in the HCA User Guide Marrick Appendix.

Support for the Marrick Ltd. X10 processors  is in the Standard, Plus, and Pro flavors of HCA.

Marrick Ltd. products are available direct from Marrick.